Mafiabikes Kush2 20.4" is a responsive BMX for learning your first tricks and building confidence fast

BMX bike key features:

• Rider height: from around 150 cm
• Top tube: 20.4"
• Wheels: 20" x 2.4"
• Cranks: one-piece
• Weight: 11.79 kg
• Skill level: beginner

A BMX that makes learning your first tricks feel more natural

The Mafiabikes Kush2 is built for learning bunny hops, manuals, 180s and your first skatepark lines. Its compact 20.4" frame keeps the bike close underneath you, so pulling up the front wheel feels easier and the bike reacts quickly when you shift your weight.

When you are just getting into freestyle BMX, you do not need a bike that fights every movement. The Kush2 lets you focus on timing, body position and clean landings instead of wrestling with an oversized frame.

A 20.4" frame for riders from around 150 cm

The Mafiabikes Kush2 is designed for you if you are around 150 cm tall or taller and want your first proper freestyle BMX.

The 20.4" top tube gives you a compact riding position without leaving too much space between you and the bars. That makes it easier to move your weight over the bike, lift the front wheel and start controlling the bike in the air.

The short rear end helps you lift the bike faster

The 13.25" chainstay keeps the back of the bike short and responsive. You will find it easier to bring the front wheel up into a manual and get the bike turning when you start learning rotations.

When you work on 180s, the rear end follows your hips more willingly. The same compact feel also helps when you pull the bike up into a bunny hop and learn the correct sequence of movements.

A steeper front end gives you quicker steering

The frame uses a 75.5° head tube angle, so the front of the bike reacts quickly when you move the bars.

You can tighten up a turn, correct the bike in the air and initiate technical tricks with less effort. If you enjoy short, fast lines in the skatepark, this setup will feel lively from the first session.

The 9" bars give you a comfortable riding position

The bars are 9" high and 29.5" wide, helping you stay more upright over the bike instead of leaning too far over the front.

That position makes it easier to set your hands and hips before take-off, while the width gives you stable leverage when you pull into a bunny hop or start working on your first spins.

Lucky 6 grips help keep your hands planted when you pull hard on the bars or make small corrections in the air.

Wide tyres give you more support on landings

The LAGOS Crawler tyres measure 20" x 2.4". Their larger volume gives you more support when you land and helps smooth out smaller bumps and rough patches.

The 2.4" width also puts more rubber on the ground, which can make the bike feel more planted when you ride skateparks, street spots or your first small jumps.

The rear rim uses a double-wall construction, giving the back wheel more support under landing loads. The front rim uses a single-wall construction.

A simple drivetrain keeps your attention on riding

The 25T front sprocket and 9T rear driver create a compact BMX gearing setup. The smaller front sprocket sits higher above obstacles, giving you more clearance when you ride over ledges or park features.

The one-piece crank and American bottom bracket form a straightforward beginner setup. As you ride more often, check the crank area regularly for play and make sure everything stays correctly tightened.

Who is the Mafiabikes Kush2 for?

This BMX is a strong choice if you are around 150 cm tall or taller and want your first bike for freestyle riding.

The compact frame helps you feel what the bike is doing during bunny hops, manuals and early rotations. Wide tyres add support, while the responsive front end makes technical skatepark riding easier to understand.

When you are ready to upgrade parts, you can explore our BMX frames, handlebars, cranks, pedals and tyres and tubes.

Safety while learning tricks

When learning tricks, it is worth wearing a helmet and protective gear. Even experienced riders regularly use protection when riding at the skatepark.

Mafiabikes Kush2 BMX detailed technical specification:

Frame:

• Material: Hi-Ten steel
• TT: 20.4"
• CS: 13.25"
• HA: 75.5°
• SA: 71°
• BB: 11.75"
• SO: 9.5"
• 14 mm dropouts
• Integrated seat clamp

Fork:

• Material: Hi-Ten steel
• Butted tubing

Handlebar:

• Material: Hi-Ten steel
• Rise: 9"
• Width: 29.5"

Stem:

• Material: aluminium
• Forged
• Front load

Rims:

• Material: aluminium
• Front: single wall
• Rear: double wall

Tyres:

• LAGOS Crawler
• Size: 20" x 2.4"

Cranks:

• Forged
• Reinforced
• One-piece construction

Bottom bracket:

• American BB

Drivetrain:

• Front sprocket: 25T
• Rear driver: 9T

Chain:

• KMC

Brake:

• Rear U-brake

Saddle:

• One-piece construction
• Vinyl cover
• Fat style

Pedals:

• VP
• Plastic

Grips:

• Lucky 6

Weight:

• 11.79 kg

Frequently asked questions

Remember that BMX bikes and other freestyle bikes are exposed to very high loads during riding. No freestyle bike is indestructible. Regular servicing and checking the condition of all parts can significantly extend the life of your bike.

Important information about your new bike:

• Before you start riding, read the warranty supplied with the bike carefully.
• Bikes ordered online are delivered approximately 90% assembled.
• Before the first ride, you must fit the pedals, handlebar and saddle.
• Some models also require the front wheel to be fitted.
• The manufacturer recommends an initial inspection by a professional bike workshop.
• This initial inspection is required to keep the warranty valid.
• Keep the receipt from the service.